You are permanently removing this notification from your Owner Site Notification Feed.
Do you wish to proceed?
Driving with a trailer can be challenging, which is why we put this article together to help you understand how to hook it up and drive safely, including the following:
- How to Hook Up a Trailer (Checklist)
- Trailer Wiring & Brake Connections
- What is “Tow/Haul” Mode?
- How to Drive Safely While Towing
- How to Prevent Trailer Sway
- What to Do If Your Trailer Starts Swaying
- Do You Need Trailer Brakes?
- How to Set Up Your Integrated Trailer Brake Module
- How to Back Up with a Trailer
- How to Use Trailer Reverse Steering Control
- Do You Need Special Insurance to Tow?
- Pro-Tips: Towing Safety for Beginners
- Common Trailering Mistakes to Avoid
- Where Can You Find More Detailed Trailering and Trailering-Feature Information?
See Trailering Basics – Part 1: What You Need to Know Before Towing a Trailer to learn more about the best vehicles for towing, how to calculate towing capacity and proper trailer weight distribution, along with a glossary of trailering terms.
For full details, see the Starting and Operating/Trailer Towing section within your owner’s manual – click here to find your owner’s manual online.
How to Hook Up a Trailer (Checklist)
Follow these steps to properly connect your trailer – it is always great to have a spotter outside of the vehicle to help provide directions:
- Install the hitch ball into the hitch shank using the lock washer and nut to secure it safely.
- Slide the hitch shank into the receiver.
- Lock it into place by sliding the hitch pin through the holes in the receiver and shank and then insert the cotter pin through the hole in the hitch pin.
- Open the coupler by raising the locking lever.
- Raise the trailer’s tongue higher than the hitch ball by extending the trailer jack.
- Pull vehicle as straight in front of the trailer as possible (to minimize steering adjustments).
- Apply the brake and shift into reverse.
- Use your backup camera screen and back up slowly, making minor and gradual steering adjustments to align the coupler with the hitch ball. If you have an older vehicle without a backup camera, have someone outside to provide direction to help you line it up.

- Once the hitch ball is directly under the trailer’s coupler, apply the brakes, apply the parking brake and shift the vehicle into park.
- Lower the coupler by raising the trailer jack until the coupler is fully seated on the ball.
- Lower the coupler’s locking lever to secure the coupler to the hitch ball.
- On trailers with fixed trailer jack, raise the jack fully
- On trailers with a pivoting trailer jack, swing the trailer jack up to its horizontal position and lock it in
- If the coupler feels too loose or too tight, use the adjusting nut (or “locking nut”) to adjust the locking mechanism.
- Too tight and you will have difficulty lowering the locking lever, which can cause you to bend or break the mechanism
- Too loose and it can cause the trailer to sway, excessively rattling or it has the potential to detach the coupler from the hitch ball
- Criss-cross the trailer chains under the hitch and coupler and connect to the trailer hitch.
- Connect the wiring harness.
Trailer Hitch Light (if equipped) can help you see when connecting in the dark – turn the trailer hitch light on by pushing the cargo light button located on the lower half of the headlight switch.

Trailer Hitch Assist (THA) (if equipped) is a feature that assists the driver with lining up the trailer hitch ball to the trailer coupler. Using the rear camera and sensors, the vehicle will automatically steer the vehicle while the driver controls the braking. For full details, see the Starting and Operating/Trailer Hitch Assist (THA) section within your owner’s manual – click here to find your owner’s manual online.

Trailer Wiring & Brake Connections

Whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motor safety. Chrysler, Dodge, Jeep® and Ram Brand vehicles equipped with a towing package include a combined wiring harness:
- 7-Way (7-pin) wiring harness for heavy-duty towing (which supports electric brakes, marking lights, turn signals, brake lights, reverse lights and 12V power)
- 4-Way (4-pin) wiring harness for many smaller, lighter-duty trailers which will support basic lighting functions (marking lights, turn signals and brake lights)

Adapters are readily available for other connectors.
Always test lights and brakes before driving.
Trailer Light Check (TLC, if equipped) will run through a sequence of lights for up to five minutes to verify functionality. Consult your owner’s manual for instructions.
What is “Tow/Haul” Mode?
Tow/Haul mode improves performance when driving in hilly areas, towing a trailer and/or carrying a heavy load towing by:
- Reducing gear shifting
- Preventing overheating
- Increasing engine braking
⚠️ Avoid using in icy or slippery conditions.

How to Drive Safely While Towing
Driving with a trailer requires adjustments:
- Drive slower: preferably in the right lane for slower traffic
- Brake earlier: allow more space between you and the vehicle in front of you – your braking distance has increased
- Take wider turns: ensure you clear the trailer tires from hitting curbs
- Use mirrors frequently:
- If you do not have trailer mirrors, adjust your mirrors backward so that you can see the trailer better
- Periodically scan your mirrors to be aware of traffic around you
- Be aware of blind spots, use turn signals, check mirrors and allow more room before changing lanes
- If you pass another vehicle, be aware that it will take longer to pass the vehicle when trailering, and that you need to allow more space for the trailer
- Trailer width: be aware that some trailers can be wider than your vehicle; stay in the center of your lane to ensure that the trailer does not cross outside of your lane
- Uphill: use a lower gear when going uphill to avoid strain on your engine and transmission
- Downhill: use a lower gear when going downhill to manage your speed and prevent overheating the brakes
Lane Centering Assistance System (if equipped) uses a camera to detect lane markings or road edges to measure the vehicle’s position and provide warnings when the vehicle approaches (or crosses) the lane marking without using your signal.
Digital Rearview Mirror & Tow Mode (if equipped) includes an additional auxiliary camera to be mounted on the rear of a trailer. When the camera is connected, the display in the Digital Rearview Mirror automatically switches to the trailer camera. To return to the Rearview Camera display, toggle through the menu options using the control buttons on the mirror.

Trailer Merge Assist (as part of Blind Spot Monitoring, if equipped) can help detect the length of your trailer and provide assistance when merging and passing (see Enhanced Driver Assistance section of your owner’s manual for options and complete instructions).

*Blind Spot Assist is only an aid to help detect objects in the blind spot zones and may not provide alerts when changing lanes under all driving conditions. Even if your vehicle is equipped with the BSA system, always check your vehicle's mirrors, glance over your shoulder and use turn signals before changing lanes. Failure to do so can result in serious injury or death.
How to Prevent Trailer Sway

To reduce sway:
- Load weight properly (60 front/40 rear)
- Maintain correct tongue weight
- Check tire pressure
- Use a weight distribution hitch for larger loads
Trailer Sway Control (TSC) can be a mechanical telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling.
Electronic Trailer Sway Control (if equipped) recognizes a swaying trailer and automatically applies individual wheel brakes and/or reduces engine power to attempt to eliminate the trailer sway.
What to Do If Your Trailer Starts Swaying
If sway occurs:
- Do not slam on the brakes
- Ease off the accelerator
- Firmly hold the steering wheel straight
- Manually activate the trailer brakes if equipped
If necessary, pull over safely to redistribute weight to the recommended 60/40.
Do You Need Trailer Brakes?
Many states require trailer brakes when the trailer’s gross weight exceeds 1,000 – 3,000 lbs., so check each state’s requirements which you will be driving in.
Benefits include:
- Shorter stopping distances
- Reduces swaying for improved control
- Reduced wear on vehicle brakes
How to Set Up Your Integrated Trailer Brake Module
Integrated Trailer Brake Module (ITBM) is designed to optimize your trailer braking performance for your towing conditions.

The GAIN setting is used to set the trailer brake control for the specific towing condition and should be changed as the trailer load, vehicle load, road conditions and weather change. Adjust until the GAIN setting is at a point just below trailer wheel lockup. If towing a heavier trailer, trailer wheel lockup may not be attainable even with the maximum GAIN setting of 10.
For full instructions, see the Starting and Operating section of your owner’s manual – click here to find your owner’s manual online.
How to Back Up with a Trailer
- Place your hand at the bottom of the steering wheel (6 o’clock position)
- With your foot on the brake, put the vehicle in reverse, make sure your path is clear and proceed slowly
- Move your hand in the direction you want the trailer to go
- Do not oversteer – provide slow, gradual inputs to avoid “jackknifing,” especially with a shorter trailer
- Use your side mirrors to keep checking both sides
- Pull forward to straighten out the trailer if heading in the wrong direction or jackknifing and then resume
- Helpful tips:
- Practice in a non-traffic area in advance before planning a trip
- Pull forward to align your truck and trailer as best as you can before you begin backing up
- Have a spotter outside to help direct you
How to Use Trailer Reverse Steering Control
Trailer Reverse Steering Control (TRSC) (if equipped) can help you steer while backing up with a trailer:

- Place the gear selector in PARK and put your foot on the brake.
- Push the activation button located above the TRSC knob in the center stack.
- The LED on the button will glow solid and the instrument cluster display will direct you to shift to REVERSE.
- Once in REVERSE, the system is active.
- Remove hands from the steering wheel and slowly back up while turning the TRSC knob in the direction you want the trailer to go.
To see how it works, watch this video: Trailer Reverse Steering Control | How To | 2026 Ram 1500 DT.
For full instructions, see your owner’s manual – click here to find your owner’s manual online.
Do You Need Special Insurance to Tow?
Check with your insurance provider, as additional coverage may be needed for the trailer and its contents.
Pro-Tips: Towing Safety for Beginners
- Check the vehicle and trailer tires for signs of tire wear, visible tire damage and for proper tire inflation.
- When connecting trailer chains, make sure they cross under to the opposite side of the hitch and have enough slack to allow turning but not so much slack that they drag on the ground.
- Do not attempt to tow a trailer while using a compact spare tire.
- Do not use cruise control on hilly terrain or with heavy loads.
Common Trailering Mistakes to Avoid
- Improper load distribution
- Ignoring tongue weight
- Neglecting tires and brakes
- Mismatched hitch and ball sizes
- Overloading capacity
- Improper cornering and braking
- Forgetting safety equipment
- Not using towing mirrors
Where Can You Find More Detailed Trailering and Trailering-Feature Information?

- Ram U.S.A. Towing Guide
- Towing Capacity Guide: input your model year and model to find your maximum trailer weight, GCWR and maximum payload
- Towing Questions
- Ram Truck Utility
- Smart Towing Tech
- Engines
- Additional Videos including Ram Truck Trailering Features:
- Ram Canada Towing
- Jeep® Towing Capacity Guide

When towing your vehicle, always follow applicable state and provincial laws. Contact state and provincial Highway Safety offices for additional details.
Do not tow a trailer at all during the first 500 miles (805 km) the new vehicle is driven. The engine, axle or other parts could be damaged.
Then, during the first 500 miles (805 km) that a trailer is towed, do not drive over 50 mph (80 km/h) and do not make starts at full throttle. This helps the engine and other parts of the vehicle wear in at the heavier loads.
es / us
en / ca