Estás eliminando de forma permanente esta notificación de tu feed de notificaciones del sitio de propietarios.
¿Deseas continuar?
A cold air intake is an aftermarket performance upgrade designed to improve engine airflow by pulling in cooler, oxygen-rich air from outside the engine bay. Many drivers install cold air intake systems to increase horsepower, improve throttle response, and enhance engine sound. Cold air intakes are especially popular on performance vehicles because they offer one of the easiest and most affordable performance upgrades available.
Mopar® cold air intakes are engineered, dyno-tested, and validated specifically for Chrysler, Dodge, Jeep® and Ram vehicles to help optimize airflow, filtration efficiency, throttle response and long-term durability. Unlike many universal aftermarket systems, Mopar intake systems are designed to integrate with factory Electronic Control Unit (ECU) calibrations, emissions systems and engine bay packaging for OEM-level fitment and reliability.

Do Cold Air Intakes Really Make a Difference?
Yes. A cold air intake can improve airflow, throttle response, horsepower, torque and engine sound. It works by reducing airflow restrictions and supplying cooler, denser air to the engine. Because cooler air contains more oxygen, the engine can create a more efficient air-fuel mixture during combustion.
Cold air intakes typically use a high-flow air filter and smoother, less restrictive tubing to help the engine breathe more efficiently. Some systems can improve airflow by up to 20%.
Bottom Line: The difference may be noticeable through quicker throttle response, stronger acceleration and a more aggressive intake sound, although actual gains vary by vehicle and application.
How Much Horsepower Does a Cold Air Intake Add?
A cold air intake can add approximately 5-15 horsepower, depending on the engine, intake design, airflow efficiency and supporting modifications - that's performance you can definitely feel. Actual gains vary by vehicle and application.

Does a Cold Air Intake Make Your Car Louder?
Yes. Cold air intakes will likely make your car louder, but it will vary by the system and your engine. An open intake will sound the loudest. Most Original Equipment (O.E.) air intake systems include components to reduce noise. Replacing these components results in a deeper, more aggressive sound under heavy acceleration.
Are Cold Air Intakes Worth It for Daily Driving?
For many drivers, yes. A cold air intake is a relatively affordable and easy-to-install performance upgrade that can improve airflow, throttle response, engine sound and horsepower. The right system depends on your vehicle, performance goals and driving habits.

Does a Cold Air Intake Increase Fuel Mileage (MPG)?
A cold air intake may improve fuel economy slightly in some applications by reducing airflow restrictions. However, any potential gains depend on the vehicle, driving conditions and driving style which may be offset by more aggressive acceleration.
Popular Vehicles for a Cold Air Intake Upgrade

Mopar® Cold Air Intakes are available for a variety of Chrysler, Dodge, Jeep® and Ram vehicles, including:
- Chrysler 300 with the 5.7L HEMI® engine or the 300C with the 6.4L HEMI engine
- Dodge Challenger R/T with the 5.7L HEMI® engine or the Scat Pack with the 6.4L HEMI engine
- Dodge Charger R/T with the 5.7L HEMI engine or the Scat Pack with the 6.4L HEMI engine
- Dodge Durango R/T with the 5.7L HEMI engine or the SRT 392 with the 6.4L HEMI engine
- Jeep® Gladiator
- Jeep Grand Cherokee SRT® with the 6.4L HEMI engine
- Jeep Wrangler or Wrangler Rubicon 392 with the 6.4L HEMI engine
- Ram 1500, 2500 and 3500
How to Choose the Right Cold Air Intake?
First, it’s important to know some terminology and your options.
- High-Flow Engine Air Filter: these use specific high-flow materials, are available for cold air intakes as well as factory air boxes. However, if used in the original air box, they are not considered a Cold Air Intake because they are still pulling in air from the factory location.

- Cold Air Intake: there are two types depending on if the air filter is open to the engine compartment or if it’s within a sealed air box.
- Open-Element: these include a high-flow engine air filter and are open to the engine compartment but often include heat shield kit/plate(s) to help reduce heat. Open-element intakes are often preferred by enthusiasts looking for maximum intake sound and airflow.
- Sealed Intake: these typically include a fully enclosed box to house the high-flow engine air filter to ensure that it only pulls cooler, outside ambient air. A sealed cold air intake is often the best option for daily-driven vehicles because it better protects against engine heat and water intrusion.


- What is the Difference Between a Cold Air Intake and Short Ram Air Intake?
- Cold Air Intake:
- Longer piping
- Places the filter near the front of the vehicle
- Captures cleaner, cooler air from outside the engine compartment
- Short Ram Air Intake:
- Shorter, straighter piping to reduce restrictions
- Filter is closer to the engine
- Uses warmer air from inside the engine compartment


- Cold Air Intake:
Compare the features and benefits of each system to choose the right combination for you.
| Feature/Benefit | High-Flow Filter with Factory Air Box | Short Ram Intake & Cold Air Intake with Open Element | Cold Air Intake with Sealed Air Box |
|---|---|---|---|
| Airflow | More than Stock | Highest | Alta |
| Air Temperature | Warm | Warmest | Coolest |
| Horsepower Potential | Minimal | Alta | Highest |
| Sonido | Minimal | Most Aggressive | Agresivo |
| Instalación | Fácil | Easy- Moderate | Moderada |
| Costo | $20 - $100 | $150 - $400 | $150 - $500 |
What Is the Difference Between Oiled and Dry Filters?
- Oiled high-flow filters – are reusable, made of cotton gauze or polyurethane foam, long-lasting (up to 50,000 miles) but require cleaning and careful application of new oil to avoid over-oiling, which can damage sensors.
- Dry high-flow filters – are reusable, made of cotton gauze and/or synthetic foam, long-lasting (up to 50,000 miles), require cleaning and do not use oil. These appeal to those looking to upgrade performance with the added security that it won’t cause mass flow sensor issues.
- Dry paper filters – are more restrictive, not reusable, made of paper or synthetic blend of materials, and intended to be replaced when dirty. This option is most appealing to drivers seeking minimum maintenance.

Mopar® OEM Cold Air Intake Versus Universal Aftermarket Intake
- Perfect Fit: save time and frustration knowing that Mopar® Cold Air Intakes are engineered and tested specifically for your Chrysler, Dodge, Jeep®, or Ram vehicle to ensure an easy guaranteed factory-level fitment – no modifications needed and no need to run back to the auto parts store for anything else.
- Vehicle-Specific Integration: Mopar Cold Air Intakes are engineered to integrate with the vehicle's factory systems, including the ECU.
- Quality Materials: Mopar uses high-quality durable materials to resist heat, maximize performance, and last a long time.
- Superior Heat Shielding: most Mopar kits include a sealed air box or heat shielding to provide cold clean air into the engine resulting in more power.
- Warranty Coverage: Mopar Cold Air Intakes are backed by applicable Mopar Parts and Accessories warranty coverage. See your dealer for specific warranty details.

If you’re looking for a cold air intake for your Dodge Challenger, Charger, Jeep Gladiator, Wrangler or Ram 1500 pickup truck, you can trust the: Mopar Online eStore: Cold Air Intake
How Difficult Is It to Install a Cold Air Intake?
Installing a cold air intake typically takes about 1–3 hours, depending on the system, vehicle and your experience. Mopar® Cold Air Intakes are engineered for vehicle-specific fitment and include the necessary components and fasteners for installation.

If you’d prefer, factory-certified Mopar technicians are available to professionally install your Mopar Cold Air Intake at your local Chrysler, Dodge, Jeep® or Ram dealer.
Do You Need a Tune When Installing a Cold Air Intake?
You do not need a tune for a standard cold air intake on most modern vehicles, as the ECU can usually adjust for the extra airflow. However, high-performance intakes with larger pipe diameters, or cars with sensitive tuning (like many turbo models), may require a tune to prevent check-engine lights and maximize performance. Consult with your dealer for more details.
How Do You Maintain a Cold Air Intake Filter?
How Often Do You Need to Clean a Cold Air Intake Filter?
You should check your cold air intake filter every oil change and clean it when dirty. The standard intake filter maintenance interval is 15,000-20,000 miles depending on your driving conditions. This works out to be about once per year depending on whether you're over or under the national average miles per year.
See standard air filter maintenance details and what types of conditions can shorten or extend your intervals at: How Often Should You Change Your Engine & Cabin Air Filter? | Mopar® OEM Guide

Signs Your Cold Air Intake Filter Needs Cleaning
Here are common signs that your cold air intake filter needs to be cleaned:
- Reduced throttle response
- Lower mpg
- Ralentí irregular
- Reduced acceleration
- Excessive intake noise
- Dirty filter appearance
How Do You Clean Your Cold Air Intake Filter?
Typically, high-flow air filter cleaning involves washing the air filter with, or soaking in, soapy water, rinsing, fully drying, and (ONLY for oiled filters) reapplying oil before installing it back into your vehicle (read the instructions included with your cold air intake filter).
Dust, dirt and other contaminants get trapped on one side of the filter where air enters the filter housing. So, focus on cleaning the dirty side with a final rinse from the clean side to push out any remaining contaminants (do not use high-pressure to avoid damaging the filter material). Some aftermarket high-flow filters may recommend using their own specialized cleaning kit from the manufacturer.
What Are the Pros and Cons of a Cold Air Intake?
Pros:
- More horsepower and torque
- Better throttle response
- More aggressive sound
- Looks better
- Reduces waste of disposable filters
Cons:
- Filter needs to be cleaned periodically
- Oiled filters: potential for sensor fault if over-oiled
- Aftermarket filters: potential for hydrolock if relocated too low
- Requires installation
- Higher initial cost than disposable filters
Where Can You Purchase a Cold Air Intake for Your Chrysler, Dodge, Jeep or Ram Vehicle?

-
Mopar® Cold Air Intakes specifically designed for your Chrysler 300, Dodge Challenger, Charger or Durango, Jeep® Gladiator, Grand Cherokee or Wrangler, or Ram 1500, are available from your local dealer, or at the Mopar Online eStore: Cold Air Intake
-
Dodge Charger, Challenger or Durango cold air intakes are also available at Direct Connection: Air & Intake.

Can a Cold Air Intake Damage Your Engine?
While not very common, a cold air intake can damage an engine due to improper installation, oil from the filter or from water entering the engine. An over-oiled filter can cause issues with the mass airflow sensor (MAF) resulting in a check-engine light. Some aftermarket cold air intakes could place the air filter too low and/or without proper shielding to keep water or slush from entering the engine resulting in hydrolock.
Choosing a Mopar® Cold Air Intake will ensure that it is specifically designed to be safe and perform at its best in your vehicle. Having it installed by a certified Mopar technician at your local Chrysler, Dodge, Jeep® or Ram dealership will ensure that it’s installed correctly.
Bottom Line: make sure the cold air intake you choose is specifically engineered for your vehicle, the filter is located safely away from water intrusion, is installed correctly and isn’t over oiled.
Will a Cold Air Intake Void Your Warranty?
Not typically. Always check with the manufacturer.
Most Mopar® Parts and Accessories are warrantied for 24 months against defects. Mopar Performance Parts vary since some are specifically designed for extreme track or off-road use. See your dealer for specific Mopar Cold Air Intake warranty details.
For full Mopar Warranty details, see Complete Mopar Parts & Accessories Limited Warranty Statement

Are Cold Air Intakes Legal in All 50 States?
Not all cold air intakes are legal in 50 states. Only those with the California Air Resources Board (CARB) Executive Order (EO) number are. Always check for "street legal in all 50 states" on the manufacturer's website.

Some aftermarket intake systems labeled for "track use only" or "off-road use only" may not comply with emissions regulations in certain states. Always verify that the CARB EO number matches your exact vehicle year, engine, and application.
Common Cold Air Intake Installation Mistakes
- Over-oiling a reusable filter
- Installing or positioning heat shielding incorrectly
- Choosing an intake that doesn't properly fit the vehicle
- Failing to properly tighten clamps and connections
- Positioning the filter where it may be exposed to excessive water
Preguntas frecuentes
-
Does a Cold Air Intake Affect Towing? A cold air intake may increase engine output, but it does not increase your vehicle’s rated towing capacity. Towing capacity depends on multiple vehicle systems and specifications. See Trailering Basics: What You Need to Know Before Towing a Trailer.
-
Can a Cold Air Intake Improve Off-Road Performance? Improved throttle response and engine output may benefit off-road driving, but overall capability also depends on tires, suspension, gearing, traction systems and other vehicle components.
-
Do Cold Air Intakes Work Better with Performance Exhaust Systems? Cold air intakes and performance exhaust systems are often paired because both are designed to improve engine airflow. Actual combined horsepower gains vary by vehicle, engine and specific components.
-
Can a Cold Air Intake Cause a Check Engine Light? It can, although it is uncommon. Possible causes include improper installation, air leaks or excess oil from an over-oiled filter affecting the mass airflow sensor.
What Other Performance Upgrades Should You Consider?

Some of the most popular performance upgrades for Chrysler, Dodge, Jeep® and Ram vehicles are:
- Brake kits: performance calipers, rotors, and brake pads for shorter stopping distances, and greater resistance to heat and fading
- Performance Exhausts: higher flow exhaust systems reduce backpressure which increase horsepower and torque, improve throttle response and provide a deeper more aggressive tone.
- Stage kits: combinations of tuners, intakes, filters, exhausts, pulleys, etc. engineered to work together to increase a vehicle’s horsepower and torque
- Suspension kits: shocks/struts, springs, sway bars, bushings, etc. to enhance performance handling. Lower your vehicle to improve street/track control and handling. Or lift your vehicle for bigger tires, more ground clearance and better off-road capability.
- Wheels & Tires: wider wheels and tires can provide more grip and improve handling. Larger wheels may be required for larger off-road tires.
Where can you purchase these and other performance upgrades for Chrysler, Dodge, Jeep® and Ram vehicles?
- Mopar® Performance – authentic Mopar Performance Parts, tested and approved for your Chrysler, Dodge, Jeep® or Ram Brand vehicle
- Jeep® Performance Parts – hardcore parts for hardcore off-roaders, specifically designed, engineered, built and quality-tested to elevate your ride to entirely new levels of performance
- Direct Connection – Dodge Brand-specific factory-backed performance parts and technical information straight from the factory.



Key Takeaways
| Beneficio | Typical Result |
|---|---|
| Caballos de fuerza | + 5–15 HP depending on application |
| Throttle Response | Quicker |
| Sonido del motor | Deeper/more aggressive |
| Ahorro de combustible | May improve slightly |
| Installation Time | Typically, 1–3 Hours |
| Tune Required | Usually Not |

en / us
en / ca